Products and Solutions

Product Introduction

Lab Scraper Type Disperser is a newly developed lab machine with dispersing and scraper function. During dispersing process, scraper rotates along the tank wall and generates a radial mixing flow. In addition, the PTFE scraper can scrape the materials on the tank off efficiently. It is good for the materials with mid-and-high viscosity and thixotropy property. The finished products can be discharged completely and the tank is easy to clean.

【Materials Viscosity】: ≤100,000 cps
【Production Capacity】: 5L
【Application Industry】: Prefect meet the requirement of dispersing and mixing from biology, pharmaceuticals, food, paint, ink, adhesive, pigment, pesticide etc. (Please click ‘Free Consultation’ for more information)
【Applicable Materials】: ood for all kinds of slurries with viscosity less than 100,000cps, and solid content less than 60%, such as emulsion paint, industrial paint, water-based ink, pesticide suspension, adhesive and etc anaerobic adhesive and etc.

 

    • Co-axial Dual-shaft Hydraulic Lifting High Speed Disperser

    Free Consultation Purchasing Hotline:+86-21-52913185

    Product Advantages

    Higher efficiency, better quality
    The linear velocity is over 20m/s; it can disperse the powder into the liquid rapidly and efficiently.
    Easier and safer operation
    Adopt electrical push rod as lifting actuator, easy to operate and stable. The dispersing disc and scraper can be disassembled and replaced quickly, easy to clean.
    Clean discharging and easy maintenance
    The scraper perfectly solves the problem of materials staying on the wall and it is designed to be adjustable. It clings to the tank wall well under the counterforce of materials’ action, with long service life, easy to replace due to the bolts design.
    Customized Options
    Different options are available such as explosion-proof type, closed vacuum type, one machine with multi-tanks etc.. Material can be customized to be SS304 \SS321 \SS316L.

      • Co-axial Dual-shaft Hydraulic Lifting High Speed Disperser working principle

      Working Principle

      Through the high-speed rotation dispersing disc, the materials will become in annular form flow, resulting in strong vortex flow, which descend down to the bottom of the vortex in spiral state. During the process, materials are dispersed, dissolved, mixed and emulsified efficiently due to the strong shearing crash and friction among the particles.
      PTFE scraper rotates clinging to the tank wall to scrape the materials staying on the tank wall off and also enhances the materials circulation.
       

      Typical Case

      Lab Scraper Type Disperser in European Coating Show
      The following picture is about SIEHE Industry’s Lab Scraper Type Disperser showed in European Coating Show and this machine catches the visitor’s eye.

      【Model】:SFST-5
      【Tank】:7.5L
      【Features】:With sheath lifting cover, with scraper

        • Co-axial Dual-shaft Hydraulic Lifting High Speed Disperser typical case

        Technical Parameter

        Working mode

        Voltage

        Working Volume

        Power

        Speed

        Transmission

        Mixing Agitator

        Lifting

        Disperser

        380V/50Hz/3P

        5L

        1.1KW

        100-6000RPM

        V-shaped Belt

        Single-layer dispersing disc, diameter 80mm

        Electric lifting, stroke 500mm

        Scraper

        380V/50Hz/3P

        5L

        0.25KW

        13RPM

        Synchronous Belt

        PTFE scraper

         

           * The capacity on above table is tested based material in viscosity 3,000cps. Please choose the model according to viscosity and specific gravity of materials.

           * Special operation condition, such as high temperature, high pressure, explosive, combustible and corrosive etc, details are required for correct model selection.  
           * If any change in the above table, subject shall prevail without notice.
           * The table cannot include all products, please contact with our sales engineers for more information.

        Online requirements submission / Feedback

        If any inquiry or place order, please fill out the following form so that we could contact you as soon as possible;

        Submit

        Contact Information

        Shanghai SIEHE Mechanical & Electrical Equipment Co.,Ltd

        Address: Rm. 305-307, Building 1, No. 168 Taihong Rd., Hongqiao Business District, Shanghai

        Factory address: No.548 Zhenying Rd.. Qingpu Industrial Park, Shanghai, China

        +86 21 52913185 52913186

        +86 21 52912822

        siehe@siehechina.com

        www.sieheindustry.com

        Check Map

        Latest Newest