Products and Solutions

Product Introduction

Automatic Liquid Filling Machine (Volume Type) consists of the following parts: automatic arrangement of dividing barrel and lift barrel system, double head volume type filling system, convey system, automatic lift and gland cover system, automatic code/labeling system, the finished product output system, packaging platform, control system etc.. Parts contact with material is SUS304 stainless steel, the conveying system roller is made of stainless steel, roller chain plate for engineering plastics, aluminum frame. The automatic arrange dividing barrel and lift barrel system is customized automatic separation equipment for overlap exposure plastic containers. It is dedicated equipment that conveys the overlap exposure plastic containers to the separation machine, by machine grab and separate, and convey them to the next station by pipeline. Filling system consists of four parts: hopper, piston metering pump, filling mouth, rack and pneumatic control system; The filling nozzle height can install by loosen the cylinder block of hex bolt, adjusted to the required position and tighten; Filling adopt low filling type filling, when filling, filling mouth put into the bottom of the barrel, filling and slowly rising at the same time, maintain proper distance between the filling mouth with the liquid surface, which can effectively prevent material splash. Automatic cover & gland system consists of cover storage shelf, cover suction machine, cover holding cylinder, cover clamping cylinder, cover pressing cylinder. It is machine made for overlap exposure plastic container lid cover to finish automatic separation, lift, and gland. It single separate the overlap exposure container cover, by fetching manipulator, and placed in a sealed container needed, again through the photoelectric detection, special die pressure, to push back the cover and barrel close together.

【Materials Viscosity】: ≤100,000 cps
【Filling Range】: 1000-5,000ml
【Application Industry】: Suitable for filling of flow materials in industries such as food,medicine, coating, ink, nail polish, adhesive, daily chemical, detergent, pesticide, lubricant, etc.. (For more application industry, please click “Free Consultation” )
【Applicable Materials】: Materials shall be with viscosity less than 100,000cps, liquid or slurry with a certain liquidity such as vegetable oil, olive oil, color paste, organic solvent, water-based ink, adhesive, detergent, etc..


    • Automatic Liquid Filling Machine (Volume Type)
    • Filling machine

    Free Consultation Purchasing Hotline:+86-21-52913185

    Product Advantages

    Filling quickly, wide application
    Filling head can use double-head filling, piston working, high filling speed, cost savings, and reduce the workers’ work pressure; The machine use linear filling and suit for a variety of specifications of bottle type, easy to adjust.
    Convenient operation, easy maintenance
    Improved design on the basis of similar foreign similar product, the machine has added some additional features design, which makes it more easy, convenience, stable and reliable in operation,accuracy, install and adjust, cleaning and maintenance.
    Environmental protection index outstanding and safe
    Full pneumatic control meet the requirements of explosion-proof; Immediately after filling, the lid-clamping and lid-pressing finished quickly, less solvent evaporation, and the environment is good.
    Customized design, excellent performance
    Using drip-proof and brushed filling cocks, prevent bubble product filling lifting system, to ensure that the bottle mouth positioning system and liquid level control system.

      • Automatic Liquid Filling Machine (Volume Type) working principle

      Working Principle

      Placed empty bucket in storage area (barrel storage area can storage nine lines,each line with10 barrels), turn on automatic running program, the conveying system begin to rotate, put down another line of empty bucket, send belt convey the bucket forward, when arrived at retaining barrel institutions, the cylinder C stretched out, and clamp the second barrel;suction bucket cylinder E stretched out, and through the vacuum suction am empty bucket and return, turning cylinder F stretched out, and make the bucket turn 90 degrees, suction bucket cylinder E stretched out and vacuum released,
      and place the bucket on the conveyor chain plate.When there are two empty barrels arrived at the filling station, filling system will signals, filling head fell to the bottom of the barrel, gives the signal and start filling, the filling head slowly rising at the same time. When filling to set a dose, metering pump return, absorption material to prepare the next filling. After filling, the barrel continued delivery and stop at the cover location, automatic cover, after finish the cover action, it positioning loosen, and barrel continued transmission, stop at the gland station, gland automatically,positioning loosen when complete mixing and gland procedure, barrel continued transmission, stop when arrive at the labeling station, automatic labeled play yards, then stop and positioning loosen and sent to finished product storage area after finish, the operation is complete.

      Typical Case

      Automatic Liquid Filling Machine (Volume Type) handover
      This customer, based in Canada, is a professional production enterprise of ink, photos are the Automatic Liquid Filling Machine (Volume Type) Siehe Industry customized for them, filling capacity 1000ml.

      【Filling volume】:1000ml
      【Features】:Double head filling,ink products

        • Automatic Liquid Filling Machine (Volume Type) typical case

        Technical Parameter

        Model: SQGZ-1
        Air Source: ≧0.6 mpa
        Filling Speed: 25~35 can/min
        Filling Capacity: 1-5L/can
        Filling Error: ±1%(within filling range)

        Online requirements submission / Feedback

        If any inquiry or place order, please fill out the following form so that we could contact you as soon as possible;


        Contact Information

        Shanghai SIEHE Mechanical & Electrical Equipment Co.,Ltd

        Address: Rm. 305-307, Building 1, No. 168 Taihong Rd., Hongqiao Business District, Shanghai

        Factory address: No.548 Zhenying Rd.. Qingpu Industrial Park, Shanghai, China

        +86 21 52913185 52913186

        +86 21 52912822

        Check Map

        Latest Newest