Product Introduction Product Advantages Working Principle Typical Case Recommended Product Technical Parameter Application Industry
Double cone mixer is mainly used in powder-powder mixing, especially for materials in small batch and has high uniformity requirement. The equipment adopts W structure and cylinder is rotatable. The mixing process is divided into stop & feeding, start & mixing, stop & discharging, etc. Vacuum feeding device can be equipped.
【Materials Specific Gravity】: | ≤7g/cm³ |
---|---|
【Production Capacity】: | 100-4,000L |
【Application Industry】: | Suitable for the material mixing of pharmacy, food, essence,dye, chemical industry, plastic, rubber and etc. (more information please click FREE CONSULTATION) |
【Applicable Materials】: | Powders or particles whose specific gravity is under 7g/cm³and with certain fluidity, liquid content is under 10%, such as medical intermediate, flavoring, flour, essence, graphite, coffee powder, iron powder and etc. |
1. Nice structure, easy to operate and clean, stable working without noisy.
2. High uniformity for almost all materials mixing.
3. Can be vacuumed feeding and discharged by butterfly valve to realize dust-free operation.
4. Overloading protection protect the motor and tachometer control the location of discharged material after operation.
5. In terms of materials lack of fluidity, forced agitator is in option.
6. Spray device is option to inject small scale liquid.
7. Jacket is available to heat, cool and dry materials.
D V-shape mixer consists of rotatable cylinder, support frame, driving part, etc..
The cylinder is designed as W-shape, mixing blade can be mounted inside the cylinder. Materials are lifted, dripped, mixed with the rotation of cylinder during operation, therefore no mixing dead zone.
Double cone mixer
The following picture shows the customized double cone mixer for a famous international pharmaceutical manufacturer. It will be used in medicine powder mixing.
【Model】:SHHZ
【Design Volume】:100L
【Products Characteristics】:1.high uniformity 2.low energy-cost 3.easy to clean
Design Volume(L) |
Capacity (L) |
Power (kw) |
Speed (rpm) |
Size(mm) |
(kg) |
|||
Length |
Width |
Width |
||||||
SHHZ-100 |
100 |
20~50 |
1.5 |
15 |
1300 |
600 |
1400 |
250 |
SHHZ-200 |
200 |
40~100 |
1.5 |
15 |
1500 |
600 |
1600 |
300 |
SHHZ-300 |
300 |
60~150 |
2.2 |
15 |
1580 |
650 |
1720 |
380 |
SHHZ-400 |
400 |
80~200 |
2,2. |
15 |
1800 |
700 |
1900 |
600 |
SHHZ-500 |
500 |
100~250 |
2.2 |
15 |
2010 |
800 |
2000 |
650 |
SHHZ-1000 |
1000 |
200~500 |
3 |
12 |
2300 |
1050 |
2570 |
900 |
SHHZ-1500 |
1500 |
300~750 |
4 |
12 |
2900 |
1300 |
2660 |
980 |
SHHZ-2000 |
2000 |
400~1000 |
5.5 |
12 |
3000 |
1300 |
2800 |
1510 |
SHHZ-2500 |
2500 |
500~1250 |
7.5 |
12 |
3000 |
1300 |
3180 |
1550 |
SHHZ-3000 |
3000 |
600~1500 |
11 |
10 |
3100 |
1300 |
3400 |
1650 |
SHHZ-4000 |
4000 |
800~2000 |
15 |
10 |
3200 |
1300 |
3600 |
1880 |
SHHZ-6000 |
6000 |
1200~3000 |
22 |
10 |
3500 |
1300 |
3800 |
2350 |
SHHZ-8000 |
8000 |
1600~4000 |
30 |
10 |
3980 |
1300 |
4300 |
2680 |
* The above listed Max. processing capacity is calculated as per powder with specific gravity 1 as medium. The model selection should depend on the comprehensive factors such as
materials viscosity, specific gravity etc.
* If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection.
* The above data and picture is subject to change without notice. The accurate parameter should be subject to the object.