Products and Solutions

Product Introduction

Horizontal plough mixer is a Germany-technical late-model mixing equipment with high efficiency, high uniformity, high loading coefficient but low energy cost, low pollution and low crush. The agitator consists of multi-group of plough and fly-cutter which works together to mixing, smash, and dispersing materials. It is widely used in the mixing of powder=powder, powder-liquid and powder-particles, especially for the materials which may get aggregation during mixing. Liquid can be sprayed into powders. Vacuum system and drying system are also in option.

【Materials Specific Gravity】: ≤5g/cm³
【Production Capacity】: 50-30,000L
【Application Industry】: Suitable for the mixing of pharmacy, food, pesticide, dye, chemical industry, plastic, lithium battery, ceramic, chemical fertilizer,rubber, mortar and etc. (more information please click FREE CONSULTATION)
【Applicable Materials】: Powders with fluidity whose specific gravity is up to 5g/cm³, liquid content is up to 20%, such as medical intermediate, flavoring, pesticide, reactive dyes, water-free dirt, lithium cobalt oxides battery material and etc.

 

    • Mixer
    • horizontal ribbon mixer
    • dry powder mixing machine
    • powder mixing machine
    • powder mixing machine, powder
    • liquid powder mixing machine
    • mixing machine manufacturing factory
    • Horizontal Plough Mixer
    • Horizontal Plough Mixer

    Free Consultation Purchasing Hotline:+86-21-52913185

    Product Advantages

    Rich Experience&Excellent Design Aptitude
    Products are designed according to the characteristic of raw and finial products materials and manufacturing process(i.e. Pressure requirement, proportion of solid and liquid) to meet the requirements in driving device, operability, leakproofness and etc. areas.
    For instant, SIEHE industries developed high leakproofness, vacuumed and heating cylinder for battery materials, the entire equipment heated in 400℃ for some special powder, special fly-cutter also be improved for environmental engineering sludge treatment.
    Reliable Driving Device
    Different driving devices in various capacity, power and output speed are in option according to the materials, starting methods and mixing method.
    Driving motor uses SIEMENS, ABB, SEW and etc international brands products, output torque can be output by direct-combination, chain-wheel combination, hydraulic couplers and etc.
    Reducers uses K series spiral cone gear reducer( or H series gear box reducer) with high usage coefficient, large rated torque, high conveying rate, safe, long service life, low noisy, low risk of failure, easy to maintenance and etc advantages.
    High Efficient Mixing Device
    Plough adopts removable design which could adjust the gap between plough and chamber wall according to different fineness, fluidity of the materials.
    Different surface treatment are for option to strengthen the plough in hardness or wear-resistance, materials with high hardness also can be used to produce ploughs to meet the special operation conditions. Surface treatment includes surface carburizing/nitriding, heat treatment, tungsten carbide spray and etc.
    Main shaft agitator: traditional plough, serration plough, scraper plough; fly-cutter: multi-plate cross cutter, dual-plate lotus cutter and other customized cutters.
    Nice Assistant Component
    Assistant components are in option, such as: coil steam heating jacket, honeycomb anti-pressure jacket, recycle-medium jacket, real-time sampling valve, high speed fly-cutter, temperature detector, weighting system, dust collecting system, vacuum drying system and etc.
    Spray and atomizing device are in option to spray little liquid which will mix the liquid into powders better. Spraying system consists of pressure source, liquid storage tank, spray device.
    Cylinders can be designed in carbon steel, SS304, SS316L, SS321, other harder alloy agitators can also be used on agitator. Lining of cylinder can be polyurethane or spraying wear-resistant material.

      • Horizontal Plough Mixer working principle
      • Horizontal Plough Mixer

      Working Principle

      orizontal plough mixer consists of drive disk assembly, agitator, round-shape cylinder, high-speed fly-cutter. The plough not only disperses materials along axial direction during high speed rotation, but drives the materials flow in circles around the cylinder wall, which settles the stratification efficiently. At the same time, fly-cutter rotates in high speed to smash the agglomeration. With the combined action of plough and fly-cutter, materials can be fully mixer in short period.

      Typical Case

      Horizontal Plough Mixer
      The following picture shows a customized horizontal plough mixer made for an American beverage and snack food company, who is the fourth largest food and drink company in the world, located in New York and owes 140.000 employees in 200 countries and regions.

      【Model】:SHDH
      【Design Volume】:300L
      【Products Characteristics】:1.stainless steel 2.nice seal 3.with spray device

        • Horizontal Plough Mixer typical case
        • Horizontal Plough Mixer
        • Horizontal Plough Mixer

        Technical Parameter

        Model

        Power

        (kw)

        Speed (rpm)

        Fly-cutter Power&Q’ty (kw)

        Fly-cutter speed(rpm)

        Size

        mm

        Capacity

        L

        Size

        Weight

        kg

        length

        width

        Heigth

        SHDH-0.05

        2.2

        0-150

        1.5*1

        2930

        Ø400*418

        20-30

        1000

        700

        1200

        260

        SHDH-0.1

        3

        85

        3*1

        1440

        Ø400*800

        30-60

        1500

        500

        700

        400

        SHDH-0.2

        4

        85

        3*1

        1440

        Ø500*1000

        60-120

        2000

        600

        900

        600

        SHDH-0.5

        7.5

        62

        3*2

        1440

        Ø700*1200

        150-300

        2500

        800

        1200

        1100

        SHDH-1

        11

        62

        3*2

        1440

        Ø900*1500

        300-600

        2700

        1000

        1450

        1600

        SHDH-2

        15

        50

        3*3

        1440

        Ø1100*2000

        600-1200

        3300

        1200

        1700

        2500

        SHDH-3

        18.5

        50

        3*3

        1440

        Ø1280*2250

        900-1800

        3800

        1300

        1950

        2900

        SHDH-4

        22

        42

        3*4

        1440

        Ø1400*2700

        1200-2400

        4100

        1400

        2000

        4000

        SHDH-5

        30

        42

        3*4

        1440

        Ø1500*3000

        1500-3000

        4200

        1500

        2000

        4500

        SHDH-6

        37

        42

        3*4

        1440

        Ø1600*3200

        1800-3600

        4500

        1700

        2000

        6000

        SHDH-8

        45

        33

        3*5

        1440

        Ø1650*3750

        2400-4800

        5000

        1800

        2200

        7500

        SHDH-10

        55

        33

        3*5

        1440

        Ø1800*4000

        3000-6000

        6000

        1900

        2500

        8500

        SHDH-15

        75

        26

        3*6

        1440

        Ø2000*4800

        4500-9000

        7000

        2100

        2800

        9800

        SHDH-20

        90

        26

        3*8

        1440/2930

        Ø2200*5600

        6000-12000

        8000

        2400

        3000

        13800

        SHDH-30

        132

        20

        3*8

        1440/2930

        Ø2300*7500

        9000-18000

        10000

        2600

        3500

        18500

         

           * The above listed Max. processing capacity is calculated as per powder with specific gravity 1 as medium. The model selection should depend on the comprehensive factors such as
              materials viscosity, specific gravity etc.
           * If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection.
           * The above data and picture is subject to change without notice. The accurate parameter should be subject to the object.
           * Not all products are listed. For more information, please contact our sales engineer.

        Online requirements submission / Feedback

        If any inquiry or place order, please fill out the following form so that we could contact you as soon as possible;

        Submit

        Contact Information

        Shanghai SIEHE Mechanical & Electrical Equipment Co.,Ltd

        Address: Rm. 305-307, Building 1, No. 168 Taihong Rd., Hongqiao Business District, Shanghai

        Factory address: No.548 Zhenying Rd.. Qingpu Industrial Park, Shanghai, China

        +86 21 52913185 52913186

        +86 21 52912822

        siehe@siehechina.com

        www.sieheindustry.com

        Check Map

        Latest Newest