All-round Grinder
All-round grinder consists of main grinder, ultrafine powder collection device and electric cabinet. It is characterized in stable technical performance, low noise, electricity saving, high productivity, nice appearance, stable running, compact structure and space-saving etc.. Strictly accordance with the GMP standard design, can ensure the cleanliness of crushing material, no dust float in the sky in the process of production, and can improve the utilization rate of material. It is widely used industry such as medicine, food and chemical.
-
Particle size of original materials≤10mm
-
Production Capacity60 - 1500kg/saat
-
Applicable MaterialsSuitable materials shall be chemical material, Chinese herbal medicine and block class materials, various low oil content grain,dry feed and cereals and other hard and brittle materials. (For more application industry, please click “Free Consultation” )
Advantages
-
Convenient fineness adjustment
Can be changed for different number mesh screen to adjust the fineness of finished product.01
-
Environmental protection index outstanding and safe
The whole system is closed grinding,little dust, low noise, the production process is clean and environmental protection; The dismantle and clean of the equipment is convenient , the wall is smooth and without dead angle.02
-
Health and safe
The machine materials is all stainless steel, all tooth surface within the case(grinding groove) have been precision machining so as to achieve smooth surface, easy to clean. It changed the wall roughness, easy accumulate power and difficult clean phenomenon of the ordinary grinder, and make the food , drug and chemical production can better meet the national standards, and achieve the GMP health requirements.03
-
Small temperature rise
Equipment can be equipped with water cooling device, can apply to low melting point, low flash point, heated easy soft and sticky materials.04
Working Principle
Main Grinder is consists of base seat, man shaft, shell, removable tray, fixed tray, sieve, hopper, dust device etc.. Removable tray is fixed on the main shaft and the fixed tray is installed on the front cover. The removable tray rotates at high speed along with the main shaft. The materials are smashed by their relative movement. The smashed materials are sieved, the finer ones go through the mesh and flow out from the outlet of the base seat. While the coarse ones stay in the chamber for further smashing, This process repeats until all the materials are smashed. The micro/fine powders from the outlet are collected in the filtration bags inside the de-dusting box under the negative pressure. Rap the cloth bag and materials fall down to material tray.
Particle size can be decided by the change of different number sieve.
Related machine
Technical Parameter
|
Model |
Particle size of the original materials （mm） |
Particle size of the finished materials d97 （um） |
Capacity （kg/h） |
Motor power （kw） |
Spindle speed （rpm） |
Dimension （mm） |
| SWFB-20 | <6 | 60～120 | 60～150 | 4 | 4500 | 1280×600×1660 |
| SWFB-40 | <10 | 60～120 | 100～300 | 5.5 | 3800 | 1280×600×1660 |
| SWFB-60 | <10 | 60～120 | 150～600 | 7.5 | 3200 | 1450×700×1800 |
| SWFB-80 | <10 | 60～120 | 500～1500 | 11 | 2500 | 1950×850×2100 |
* If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc., detail data is required for correct model selection.
* If any change in the above table, subject shall prevail without notice.
* The table cannot include all products, please contact with our sales engineers for more information.
Industry applications
Contact Information
-
+86 21 52913185
+86 21 52913186 -
+86 21 52912822
