Continuous Mixer
This machine is suitable for powder-powder, powder-granule, powder-liquid mixing. Agitators, with a special design in different type (blade, plough, ribbon, etc.) are mounted inside the round, U-shape or O-shape working chamber, materials are fed into the inlet on one end, get mixed inside the chamber and discharge from the outlet on the other end. Normally the materials will stay in the mixer for around 30-120s to implement continuous feeding and discharging.
【Operation Requirements】: 1. Feeding system should be stable and continuous. 2. Feeding speed of each kind of raw material should be proportionally according to the formula. 3. The next process after mixing should deal with the discharged materials in time and not cause blocking. 4. Small amount material (e.g. ≤5%), should be pre-mixed to enlarge its proportion before feeding to the continuous mixer. 5. The feeding speed of the system determines the capacity of mixer, and capacity requirement, mixing uniformity and material feature determines which model to choose.
-
Production Capacity5-400T/h
-
Application IndustryFood, chemistry, building, mining, environmental protection, etc. (for more information please click FREE CONSULTATION)
-
Applicable MaterialsMaterials with close proportion, needs of short mixing time and good fluidity; such as reactive dye, water-free dirt, slag, fireproofing material, ceramic material, chemical fertilizer, etc.
Product Advantages
-
Equipment material
Carbon steel, SS304 and SS316L for option, meeting the requirement in sanitation, corrosion and wear-resisting working condition.01
Adding liquid: The liquid can be mist-sprayed into the mixer, fulfill uniform mixing requirement for small amount of liquid.
Working Principle
Continuous mixer consists of mechanical drive parts, agitators (ribbon, plough, blade) and working chamber.
Ribbon type: The outer ribbon push the materials from inlet end towards the outlet end whereas the inner ribbon push material in reverse direction, different ribbon angle, direction generate different materials flow, therefore the materials get fully mixed.
Plough type: The plough not only disperses materials along axial direction during high speed rotation, but also drives the materials flow in circles around the chamber wall, which settles the stratification efficiently. At the same time, the high speed cutters generate breaking and dispersing effect.
Blade type: Blades arranged in a special angle rotate reversely at the same speed, to ensure the materials are thrown in radial, axial, and circle direction, generate cross circulating, mixing and shearing effect.
Different chamber shape (U-shape, O-shape, 270º cylinder) are for option to meet the different material’s requirements.
Recommended Product
Technical Parameter
| Model | Design Volume
（L） |
Size
（mm） |
Production capacity
（m³/h） |
Power（Kw） | Speed
（r/min） |
Size
（mm） |
Weight
（T） |
|---|---|---|---|---|---|---|---|
| SHLX-2000 | 2000L | Ø1000*2800 | 20~50 | 22 | 60 | 4500*1100*1600 | 3.5 |
| SHLX-4000 | 4000L | Ø1100*4000 | 50~100 | 45 | 50 | 6500*1300*1800 | 5 |
| SHLX-6000 | 6000L | Ø1300*4500 | 80~200 | 75 | 42 | 7500*1500*2000 | 8 |
| SHLX-8000 | 8000L | Ø1400*5200 | 100~300 | 90 | 33 | 8500*1600*2200 | 11 |
| SHLX-10000 | 10000L | Ø1500*6000 | 150~400 | 110 | 28 | 10000*1800*2500 | 14 |
* The above listed Max. processing capacity is calculated as per powder with specific gravity 1 as medium. The model selection should depend on the comprehensive factors such as
materials viscosity, specific gravity etc.
* If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection.
* The above data and picture is subject to change without notice. The accurate parameter should be subject to the object.
* Not all products are listed. For more information, please contact our sales engineer.
Application Industry
Contact Information
-
+86 21 52913185
+86 21 52913186 -
+86 21 52912822
