Vibrating Feeder
Vibrating Feeder is also known as vibrating feeding machine; it could put lumpish, granular materials into material accepting device uniformly, timely and continuously from silos during the production process, it could feed for crusher machinery continuously and evenly in gravel production line, and coarse screening the material, widely used in the crushing and screening combination equipment of the industries such as metallurgy, coal, mineral processing, building materials, chemicals, abrasives and so on.
-
Conveying Distance≤50m
-
Conveying Capacity≤1500m³/h
-
Application IndustrySuitable for industries such as Building materials, chemical industry, electric power, metallurgy, coal mining and food etc.. (For more application industry, please click “Free Consultation”)
-
Applicable MaterialsApplicable for horizontal or oblique conveying powder, granulated and small lump materials, such as cement, fly ash, pesticides, titanium dioxide, paint, etc. Belt conveyor is not suitable for conveying perishable or high viscosity materials.
Product Advantages
-
1, steady vibration, reliable work.01
2, gridlines gap is adjustable.
3, more wearable pieces.
4, special grid design, to prevent material blocking.
5, to prevent small-quantity material abrades the wear-resistant parts, separate the small-quantity material, to increase production output.
6, can choose frequency conversion motor, to adjust the frequency, thereby changing the output, easy to control the feeding amount, no need to re-start motor frequently. Start frequency is low, considering the entire production line, easing jaw crushing, counterattack broken pressure; avoid starting high power devices frequently.
Working Principle
The feeding process of the feeder is to use special vibration motor or two electric motors put the vibration exciter in motion so that drives the feeding trough make periodic and reciprocating vibration along the oblique direction, when the accelerated velocity of the feeding trough is greater than the vertical gravitational acceleration, the material in the trough will be tossed, and jump forward following the parabolic trajectory, the toss and jump movement were finished instantaneously, due to continuous excitation from the excitation source, the vibration trough vibrates continuously, the coal in the trough jumps forward consecutively, so that achieves the purpose of feeding.
Recommended Product
Technical Parameter
| Model | Size of Trough WxLxH(mm) |
Feeding Capacity
(T/h) |
Motor Frame Size | Power
(kw) |
Vibration Frequency
(Hz) |
Amplitude (double)
(mm) |
Weight (kg) |
|
|---|---|---|---|---|---|---|---|---|
| α=0° | α=10° | |||||||
| STZG-1015 | 1000×1500×200 | 200 | 450 | Y112M-6 | 2×1.5 | 16 | 12 | 998 |
| STZG-1020 | 1000×2000×200 | 200 | 450 | Y112M-6 | 2×2.2 | 16 | 12 | 1053 |
| STZG-1216 | 1200×1600×280 | 200 | 600 | Y112M-6 | 2×2.2 | 16 | 12 | 1050 |
| STZG-1220 | 1200×2000×280 | 200 | 600 | Y112M-6 | 2×2.2 | 16 | 12 | 1123 |
| STZG-1525 | 1500×2500×330 | 500 | 1200 | Y132S-6 | 2×3 | 16 | 12 | 1850 |
| STZG-1530 | 1500×3000×330 | 500 | 1200 | Y132S-6 | 2×3 | 16 | 12 | 1992 |
| STZG-1825 | 1800×2500×330 | 800 | 1500 | Y132M1-6 | 2×4 | 16 | 12 | 2180 |
| STZG-1830 | 1800×3000×330 | 800 | 1500 | Y132M1-6 | 2×4 | 16 | 12 | 2327 |
* The capacity is data based on powder with specific gravity 1g/cm3. The model selection shall be based on the data such as the materials mesh, specific gravity etc..
* Special operation condition, such as high temperature, high pressure, explosive, combustible and corrosive etc, details are required for correct model selection.
* If any change in the above table, subject shall prevail without notice.
* The table cannot include all products, please contact with our sales engineers for more information.
Application Industry
Contact Information
-
+86 21 52913185
+86 21 52913186 -
+86 21 52912822
